製品一覧

メーカー・製品カテゴリ・規格を指定



製品特徴タグで絞り込み (AND検索)
[CPUボード] Cavium Intel PowerPC (FreeScale) ネットワークプロセッサ
[グラフィック] AMD ATI NVIDIA
[システム製品] クラウド製品 テレコムサーバー ネットワーク(スイッチ・ゲートウェイ・アクセスポイント) パネルPC メディカルPC モニター ラックマウントシステム 堅牢型タブレット 産業用コンピュータ(BoxPC) 車両・鉄道向けコンピュータ
[スイッチ/ルーター] スイッチ ルーター
[デジタルI/O] シリアル パラレル
[通信I/O] Ethernet Ethernet以外
VadaTech

ATC807

通信I/O / AdvancedTCA
ATC807.jpg
・AdvancedTCA open standard form factor ・PICMG 3.1 compliant ・Managed Layer two 10GbE and 1GbE switch ・10GbE to the Fabric channel for 15 Node slots (option 9 or 1 selectable per port basis) ・GbE to Base Interface for 15 Node slots plus two Shelf ・Eight SFP+ cages for 10GbE ports (each port can run as GbE or 10GbE) ・Eight front panel 10/100/1000 Mbi…
lhsATC807
VadaTech

VT862

筐体 / AdvancedTCA
VT862.jpg
・μTCA System Platform 19� x 5U x 10.5� deep (with handles 12� deep) ・Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules ・Up to 10 AMCs: 10 full-size ・Dual star topology ・Radial I2C bus to each AMC ・High-speed routing on 26 layers ・High-speed mTCA connectors (12.5 GHz) ・Redundant FRU information devices ・…
lhsVT862
VadaTech

VT018

CPUボード / AdvancedTCA
VT018.jpg
・Form, fit and functionally compatible to the Intel� MPCMM0002 Module ・5W max power ・Linux release 2.6.21 ・Field upgradable with dual boot flash ・IPMI 2.0 compliant ・Telco alarms ・Isolated DC/DC converter ・Active/standby redundancy when utilizing two VT018s in system ・32-bit RISC processor @ 400MHz ・64 MB of DDR @ 266Mhz ・32Kbyte FRAM for log messa…
lhsVT018
VadaTech

AMC605

ストレージ / AdvancedMC
AMC605.jpg
・2.5 inch SAS drive ・AMC.3 compliance ・Single-width, mid-height (full- height option available) ・Heat plate on drive electronics w/ thermal pad optimizes heat removal ・Disk RPM @ 10,025RPM ・IPMI 2.0 compliant ・RoHS compliant
lhsAMC605
VadaTech

AMC331

デジタルI/O / AdvancedMC
AMC331.jpg
・AMC.1 compliant ・PCIe Gen2 x8 lanes ・Solaris ・IBTA Specification 1.2.1 compliant ・RDMA, Send/Receive semantics ・Hardware-based congestion control ・16 million I/O channels ・2GB messages ・10, 20, or 40Gb/s per port ・T10 as well as Fiber Channel over InfiniBand support (FColB) ・CPU offload of transport operations ・End-to-End QoS and congestion contro…
lhsAMC331
VadaTech

AMC239

通信I/O / AdvancedMC
AMC239.jpg
・AMC.1 ・Single-width, mid-height (full-height option available) ・Linux ・Windows ・Solaris ・VxWorks ・12 Gigabit Ethernet ports ・PCIe Gen2 x4 or x8 lanes to Ports 4-11 ・IPMI 2.0 compliant ・RoHS compliant ・OS support for:
lhsAMC239
VadaTech

AMC100

筐体 / AdvancedMC
AMC100.jpg
・Support for PMC and PrPMC modules ・64-bit PCI-X @133MHz ・Transparent or Non-Transparent Operating Modes ・PMC J4 connector routed to front panel Mini SCSI type connector or Gigabit transceiver to AMC.2 ・IPMI 2.0 Compliant Module Management Controller (MMC) ・32-bit IPMI RISC Processor ・IEEE Std P1386.1-2001 (PMC) Compliant ・ANSI/VITA 32-2003 (PrPMC)…
lhsAMC100
VadaTech

AMC518

FPGAモジュール / AdvancedMC
AMC518_AMC518
・AMC FPGA carrier for FMC per VITA-5 ・Xilinx Zynq-7000 FPGA in FFG-900 package (XC7Z045) ・AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable) ・AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
lhsAMC518
VadaTech

ART115

ストレージ / AdvancedTCA
ART115.jpg
・ATCA rear I/O Module for Blades (i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.) ・Dual DVI/VGA interface ・Resolution @ 1920x1200 ・Dual 10GbE SFP+ ・Removable on board 2.5 SAS/SATA Disk ・Two port USB 2.0 high speed (480Mbit/s) ・Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX) ・Front Blade RS-232 to DB-9 ・Dual …
lhsART115
VadaTech

ATC108

筐体 / AdvancedTCA
ATC108.jpg
・AdvancedTCA 3.0 Release 2.0 Compliant ・Up to two PCI-X edge style modules ・64-bit @ 133MHz ・Dedicated PCI-X bus for each slot ・PCIe up/down stream to ATC103/104/105/106/107/108, PCI103 or AMC103 via front or rear ・Adjustable hold down brackets ・IPMI Version 2.0 Compliant ・RoHS Compliant ・OS Support for: Linux, Windows, Solaris and VxWorks
lhsATC108