VME215 (12 / 24 Port 6U VME Managed Layer 2/3 Switch )
Referenced post not found. / VMEbus
VME compliant (only takes power from the VME bus) Managed Layer two and layer 3 switch/12 ports of 10/100/1000 via RJ-45 on the base board front panel IEEE 802.3-2005/IEEE 802.3ad (Link aggregation)/IEEE 802.1p (Prioritization)/IEEE 802.1Q (VLAN tagging) IEEE 802.1Q (Spanning Tree Protocol)/IEEE 802.1Q-2005 Multiple Spanning Tree Protocol (MSTP) Th…
UTC056(4th Gen MicroTCA Carrier Hub (MCH) 40/10GbE/PCIe/ FPGA/SRIO, Double Module)
MCH SWITCH / MCH
Fabric options include PCIe Gen3, 40/10GbE, SRIO, Cross Bar Switch (CBS) or Xilinx VU13P FPGA for complete flexibility •Front panel fabric expansion, e.g. quad Ports for PCIe Gen 3 (4x4, 2x8, or 1x16) •PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588 •Double module, full size per AMC.0 and MTCA.4
VME217 VME-Layer2 Switchボード(RJ45/SX/LX/SFP)
ネットワーク / VMEbus
12/24 Port VME Managed Layer 2 Switch • VME compliant (only takes power from the VME bus) •Managed Layer two switch •8 ports of 10/100/1000 via RJ-45 and 4 ports 1000BASE-SX or 1000BASE-LX via SFF transceivers on the base board and optional 12 Ports via SFP Ports on expansion board •4K IEEE 802.1Q VLANs
VME218 VME Layer2 Switch
ネットワーク / VMEbus
The VME218 is a 6U single slot VME module that has 12 Ports of 10/100/1000 GbE via RJ-45 on its baseboard and 12 Ports via SFP+. With 24 Ports the module will take two slots. The module also comes with 24 ports of RJ-45 and it will take two slots. The switch is managed via http and supports a rich set of features such as VLAN, Spanning tree, QoS, M…
VXS102
筐体 / OpenVPX
・Provides three additional PMC slots ・Mates to VadaTech VXS100 module ・Two distinct PCI-X busses ・Each of the PCI-X busses runs at it�s own clock speed ・PCIe x8 lane interface to the VadaTech ・VXS100 module (20Gb/sec) ・RoHS compliant
ATC808
通信I/O / AdvancedTCA
・AdvancedTCA open standard form factor ・PICMG 3.1 compliant ・Spanning tree ・Mirroring ・QoS ・SNMP and RMON ・Managed Layer two switch ・GbE to Base Interface for 15 Node slots plus two Shelf ・One port to the update channel ・Eight front panel SFP connectors for mix of Copper and Fiber interfaces ・Support up to 8K MAC address ・4K IEEE 802.1Q VLANs ・VLAN…
VT863
筐体 / AdvancedTCA
・μTCA System Platform 19� x 5U x 10.5� deep (with handles 12� deep) ・Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules ・Redundant Carrier Locator ・1000W AC Power supply option ・Telco Alarm ・CLK1, CLK2 and CLK3 ・No active components on the backplane ・Up to twelve AMCs: six full-size and six mid-size ・Dua…
VT019
CPUボード / AdvancedTCA
・For ELMA ATCA bused or radial chassis ・5W max power ・Field upgradable with dual boot flash ・IPMI 2.0 compliant ・Telco alarms ・Isolated DC/DC converter ・Active/standby redundancy when utilizing two VT019s in system ・Rich set of Management software (refer to the VT002 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc…
AMC606
ストレージ / AdvancedMC
・2.5 inch SAS drive with Expansion ・AMC.1 and AMC.3 compliance ・PCIe x4 ・RAID 0, 1 capable ・Single-width, mid-height (full- height option available) ・Heat plate on drive electronics w/ thermal pad optimizes heat removal ・Disk RPM @ 10,025RPM
AMC000
その他 / AdvancedMC
・Single-width, half-height ・32-bit IPMI RISC Processor ・Front Panel accessible I/O for monitoring IPMI traffic ・I/Os routed to 2mm Header ・Front Panel LED to indicate Status ・All Diff pairs are routed for ease of access ・IPMI 2.0 Compliant ・RoHS Compliant