製品一覧

メーカー・製品カテゴリ・規格を指定



製品特徴タグで絞り込み (AND検索)
[CPUボード] Cavium Intel PowerPC (FreeScale) ネットワークプロセッサ
[グラフィック] AMD ATI NVIDIA
[システム製品] クラウド製品 テレコムサーバー ネットワーク(スイッチ・ゲートウェイ・アクセスポイント) パネルPC メディカルPC モニター ラックマウントシステム 堅牢型タブレット 産業用コンピュータ(BoxPC) 車両・鉄道向けコンピュータ
[スイッチ/ルーター] スイッチ ルーター
[デジタルI/O] シリアル パラレル
[通信I/O] Ethernet Ethernet以外
Abaco Systems (旧GE Intelligent Platforms)

VME-6500

アナログI/O / VMEbus
VME-6500
Analog Inputs  ・8 channels with individual 16-bit ADCs  ・Software programmable sample rates, gains, filters, and high voltage and current ranges. Analog Outputs  ・8 channels with individual 16-bit DACs  ・Software programmable voltage and current ranges  ・Provides waveform generation Digital Inputs  ・16 channels with multiple voltage and current ran…
lhsVME-6500
Abaco Systems (旧GE Intelligent Platforms)

VME-3418

アナログI/O / VMEbus
VME-3418
・Constant current or constant voltage bridge excitation ・Open sensor detection ・Individual sensor excitation for each channel ・Four-, three-, or two-wire resistance temperature detectors (RTDs); prescaled RTD ranges available ・Full, half, or quarter strain gauge bridges, with on-board bridge completion ・Isolated to 1,000 VDC or 700 VRMS in two grou…
lhsVME-3418
Curtiss-Wright

FMC-XCLK2 Multi-Channel Clock Generator

アナログI/O / FMC
fmc-xclk2.jpg
・Up to four phase matched RF outputs (two differential) ・Selectable internal or external 10 MHz reference (with frequency multipliers for RF output) ・External RF clock source ・10MHz master reference output ・FMC format ・Air-cooled and rugged build options
lhsFMC-XCLK2 Multi-Channel Clock Generator
Abaco Systems (旧GE Intelligent Platforms)

VME-3113B

アナログI/O / VMEbus
VME-3113B
・Powers up in autoscanning mode-no software initialization required ・Continually digitizes all input channels and stores the results in dedicated channel dual-port registers (autoscanning mode) ・64 differential or single-ended inputs ・Supports real-time and off-line Built-in-Test
lhsVME-3113B
Abaco Systems (旧GE Intelligent Platforms)

VME-3419

アナログI/O / VMEbus
VME-3419
・Input BIT switches provide in-system calibration and autozeroing when used with the VME-4125A TESTCAL™ board ・Selectable gain per channel ・Gain selection of x1, x10, x100, x1,000 provides input ranges from ±10 mV to ±10 V ・32 differential or single-ended analog inputs ・Configurable for RTD, strain gauge bridge, or direct analog input
lhsVME-3419
Abaco Systems (旧GE Intelligent Platforms)

VME-4905

アナログI/O / VMEbus
VME-4905
・Nonprivileged or supervisory short I/O ・5 VA, 2 VA (transformer output), or 0.024 VA options ・Amp D-type (no. 206584-1) ・Internal transformers (400 Hz options) ・Front panel fail LED ・3- or 4-wire output for driving synchros or resolvers ・14-bit converter with an accuracy as high as ±1 arc minute (±4 arc minutes is standard) ・Supports off-line and …
lhsVME-4905
Curtiss-Wright

FMC-518 Quad 500MSPS 14b ADC FMC

アナログI/O / FMC
FMC-518.jpg
・Analog Input:   ・Number of Channels: 4, single-ended   ・Sampling Frequency: 80 to 500MSPS   ・Full Scale Input Voltage: 2V pk-pk   ・Device: 4x Intersil ISLA214P50   ・Input Bandwidth (3dB): up to 700 MHz   ・Input Impedance: 50 Ohm, AC coupled ・Sample Clock:   ・Connector: Front panel MMCX   ・Input impedance: 50 Ohm, AC coupled LVPECL   ・Clock Input: …
lhsFMC-518 Quad 500MSPS 14b ADC FMC