VME-2131
デジタルI/O / VMEbus
・Front panel Fail LED ・Double Eurocard form factor ・Outputs are jumper-selectable for source/high-Z or source/sink operations ・High reliability DIN-type output connectors ・Software compatible with VMIVME-2120 ・Compatible with Intelligent I/O Controllers ・Built-in-Test logic for fault isolation ・8-, 16-, or 32-bit transfers ・High breakdown voltage (…
VME-1150
デジタルI/O / VMEbus
・64 optically coupled digital inputs ・5 V to 48 VDC input range ・High isolation, 1,000 V sustained, 7,500 V pulsed ・Double Eurocard form factor with front panel ・8- or 16-bit data transfers ・Dual I/O connectors
VME-196 – VME SBC with NXP Power Architecture T2080 Processor
CPUボード / VMEbus
・NXP Power Architecture T2080 quad-core 64b SoC running up to 1.8 GHz with AltiVec ・Dual PMC/XMC sites ・Curtiss-Wright’s U-Boot, Green Hills INTEGRITY, Lynx Software Technologies LynxOS, ・Yocto NXP SDK based Linux and Wind River VxWorks 6.9 and 7 BSPs ・NXP Secure BOOT
MODEL 94018-6
VME電源 / VMEbus
INPUT 85-265 VAC, 47-440 Hz, Power Factor Corrected Input transient protection: per MIL-STD-704A OUTPUT 1. 5.0 VDC @ 80 Amps 2. 3.3 VDC @ 45 Amps 3. +12 VDC @ 12 Amps 4. –12 VDC @ .83 Amps ・Load Regulation: 0.2% Maximum (0-100%) ・Line Regulation: 0.2% Maximum ・PARD-Ripple & Noise: 150 mV (0-10Mhz) ・Current Limit: Constant current limited to 120% of…
VME-1160A
デジタルI/O / VMEbus
・Supports 8- or 16-bit transfers ・High isolation, 1,000 V sustained, 7,500 V pulsed ・Jumper-selectable nonprivileged or supervisory short I/O transfers ・Filtered input debouncing option ・High reliability DIN-type input connector ・5, 12, 24, and 48 V input option ・Wide variety of input signal conditioning ・Contact sense or voltage source options ・CO…
VME-194/B – VME SBC with NXP Power Architecture P2020 Processor
CPUボード / VMEbus
・Cost effective, Low Power general-purpose SBC with NXP (formerly Freescale) P2010/P2020 Power Architecture processor ・QorIQ P2020 Communications Processor with two Power Architecture processor cores, network and peripheral bus interfaces required for mil/aerospace applications (a Freescale QorIQ SBC) ・2 E500V2 cores at up to 1.2GHz ・512KB shar…
MODEL cPCI 6005-1-(5, 60), (3.3, 45), (12, 10), (-12, 1), (5, 2)
VME電源 / VMEbus
INPUT 85-265 VAC, 47-440 Hz, Power Factor Corrected Input transient protection: per MIL-STD-704 OUTPUT 1. 5.0 VDC @ 60 Amps 2. 3.3 VDC @ 45 Amps 3. +12 VDC @ 10 Amps 4. –12 VDC @ 1 Amps 5. 5.0 VDC @ 2 Amps ・Load Regulation: 0.2% Maximum (0-100%) ・Line Regulation: 0.2% Maximum ・PARD-Ripple & Noise: 150 mV (0-10Mhz) ・Current Limit: Constant current l…
VME-1182
デジタルI/O / VMEbus
・Interrupt level is user selected ・Complies with ANSI/IEEE STD C37.90.1-1989 surge protection when used with companion suppression panel (e.g., VME-3459) ・64 optically isolated inputs ・Multifunctions available per channel: COS; SOE; pulse accumulation; programmable debounce times; time tagging ・Short or standard, supervisory, nonprivileged, or eith…
MVME8110 – NXP® QORIQ® P5010 VME320 SBC
CPUボード / VMEbus
・NXP® QorIQ® P5010 1.2GHz ・Up to 4GB DDR3-1200 MHz ECC Memory ・512KB MRAM ・2PMC/XMC sites ・Embedded NAND Flash (8GB eMMC) ・Up to 3 USB 2.0 ports ・Up to 3 Ethernet ports ・Up to 5 Serial ports ・2 GPIO
DMCA4000
VME電源 / VMEbus
Power Supply Specifications INPUT: 115/200 VAC, 3 phase, 47-440 Hz IAW Mil-STD-704 OUTPUT(S): ・Voltage/Current: + 5VDC @ 160A (800W) + 12VDC @ 167A (2000W) + 3.3VDC @ 160A (528W) - 12VDC @ 12.5A (150W) - 28VDC @ 16A (485W) ・Voltage Ramp-Up: 20 ms min. up to 150 ms max ・Load Regulation: 0.3% (0-100%) ・Line Regulation: 0.3% ・PARD-Ripple & Noise: 100 …