FMC155 – Multi I/O FMC Module (LVDS, RS-485/422, Single-ended +3.3V)
通信I/O / FMC
・Multiple I/O in single FMC from-factor ・LVDS, RS-422, and singled-ended +3.3 V ・16x LVDS input/outputs with speed up to 350 MHz and programmable crossbar circuit routing ・8x RS-485/RS-422 TX with speed up to 20 Mbps ・8x RS-485/RS-422 RX with speed up to 52 Mbps ・16x Singled-ended +3.3 V input/outputs
FMC117(Quad zSFP+/SFP28 (protocol agnostic))
通信I/O / FMC
FPGA Mezzanine Card (FMC) compatible with VITA 57.1 •Four zSFP+/SFP28 cages •Onboard Fractional PLL to generate any clock •Protocol agnostic (i.e. 5GbE, 10Gb, 28G, Aurora, etc.)
AMC710 – PrAMC based on QorIQ P4040, 10 GbE
通信I/O / AdvancedMC
・Single module, mid-size per AMC.0 ・Conduction cooled version available ・Freescale QorIQ P4040 processor ・XAUI x4 on ports 4-7 (AMC.2) ・Single 10GbE SFP+ to the front panel ・Up to 16 GB of DDR3 w/ ECC ・Serial over LAN ・IPMI 2.0 compliant
AMC240(Dual KR/KR4 to QSFP+ Translation (40GbE/10GbE), AMC)
通信I/O / AdvancedMC
40GbE/10GbE ports to front via dual QSFP+ •10GBase-KR and 40GBase-KR to backplane •Support for IEEE802.3ab and IEEE802.3ap •Single-module mid-size (option for full-size)
FMC118(Dual zSFP+/SFP28 (protocol agnostic))
通信I/O / FMC
FPGA Mezzanine Card (FMC) compatible with VITA 57.1 •Two zSFP+/SFP28 cages •Onboard Fractional PLL to generate any clock •Front panel clock allows synchronization of the PLL to an external clock source
AMC104 – AMC Carrier for PCIe Gen 3 Module
通信I/O / AdvancedMC
・AMC PCIe Gen 3 carrier (x4 or x8) ・Double module, full-size ・Accept any standard PCIe edge style module ・connector is x16 ・IPMI 2.0 compliant
AMC232(AMC Dual-port 10GbE, RJ-45)
通信I/O / AdvancedMC
Dual 10GbE over RJ45 •PCIe Gen3 x4 lanes, AMC.1 compliant •IEEE P802.1AE LinkSec •IPV6 Support for IP/TCP
AMC080/080C(High Density Versatile Multi I/O Module)
通信I/O / AdvancedMC
AMC module with 120 I/O via front panel •Conduction cooled version available •15 banks of 8-bit I/O. Each bank is configurable as Input and/or output •I/O’s are configurable as +3.3V or +5V per bank
AMC230 – AMC Dual Port 40 GbE with QSFP+
通信I/O / µTCA
・AMC.1 compliant ・PCIe Gen3 (x4 or x8) ・Dual QSFP+ ・40Gbps full duplex bandwidth ・TCP Segmentation off load: up to 256KB ・Jumbo Frames of up to 15.5KB ・IPV6 Support for IP/TCP ・Dynamic Interrupt moderation ・RoHS compliant ・IPMI 2.0 compliant
FMC258(12 TX/RX Fiber MTP/MPO, FMC+)
通信I/O / AdvancedMC
12 full duplex transceivers on FMC+ module •Supports link lengths up to 70 m (option for 100 m) •Multi-rate capability, options up to 28.1 Gb/s per channel •Total bi-directional bandwidth > 672 Gb/s