製造中止製品(EOL)
・8 or 16 isolated input channels with active guards
・16-bit data
・1,500 VDC (1,000 VAC) isolation, input-to-input and input-to-VMEbus
・Digitizer per channel
・Input ranges of ±50 mV to ±10 V, software-selectable on channel-by-channel basis
・Software-controlled bandwidth, 0.05 to 26 Hz (6 pole low pass filters implemented with internal DSP)
・DSP-based offset and gain correction in real-time
・DSP supported E2PROM stores calibration coefficients (no trimpots)
・Conversion rate of 100 SPS (samples per second) per channel
・RTD excitation under software control (200 mA/400 mA per channel)
・Open transducer detection under software control
・Supported by GE Intelligent Platforms Embedded System's I/O controllers
・Optional current termination resistors
・Optional increased input range
・16-bit data
・1,500 VDC (1,000 VAC) isolation, input-to-input and input-to-VMEbus
・Digitizer per channel
・Input ranges of ±50 mV to ±10 V, software-selectable on channel-by-channel basis
・Software-controlled bandwidth, 0.05 to 26 Hz (6 pole low pass filters implemented with internal DSP)
・DSP-based offset and gain correction in real-time
・DSP supported E2PROM stores calibration coefficients (no trimpots)
・Conversion rate of 100 SPS (samples per second) per channel
・RTD excitation under software control (200 mA/400 mA per channel)
・Open transducer detection under software control
・Supported by GE Intelligent Platforms Embedded System's I/O controllers
・Optional current termination resistors
・Optional increased input range
